产品搜索      
首页
关于我们
产品展示
新闻中心
在线下载
联系我们
产品展示
美国GRACO油漆供料系统
Duro-Flo和Xtreme活塞泵
Endura-Flo 4D150
Merkur波纹管柱塞泵
Monark 2-Ball Pump
Presideng 2-Ball Pump
Trtion 1:1 系列
ABB喷涂机器人
IRB5510机器人系统
美国GRACO配件及辅件
喷枪
空气管及涂料管
产品类型分类
Blasting Equipment喷砂机
DEF泵
Hot Melt Equipment热熔泵
计量系统
卫生级压罐泵
压力清洗机
喷涂泡沫绝热设备
多组份保护涂层喷涂机
德国FESTOOL产品目录
中央集尘系统
移动式集尘器
特种工业集尘器
尼德曼中央集尘打磨控制柜系统
尼德曼中央集尘打磨控制柜系统
产品展示
ProControl 1KS
时间:2016/06/28 15:16 点击:6582

ProControl is a closed loop flow control system that eliminates excess material applied to the part for increased material savings. It ensures consistent flow rates and allows for better process control. 

Use with Graco's ProMix 2KS plural component proportioner for integrated color change in your automatic applications.

19386

Single Component Flow Control


  • Fast step change less than 200 msec for better process control
  • Maintain flow rates from 20 to 1,200 cc/min

Integrated Flushing

  • Air/solvent chop minimizes material waste


Optional Color Change Modules

  • Easily handles up to 30 colors


Flexible Installation

  • Intrinsically safe components
  • Compatible with solvent and waterborne materials
  • Convenient interfaces for PLC controls


ProControl 1KS
Maximum working air pressure
7.0 bar, 0.7 MPa
Air supply
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
Fluids handled
one component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
5–50°C
Environmental conditions rating
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
275.8 bar, 27.58 MPa
Low pressure color change
20.6 bar, 2.07 MPa
Coriolis Meter
158.6 bar, 15.86 MPa
Flow control
13.1 bar, 1.31 MPa
Fluid Flow Rate Range
G3000, G250 Meter
75–3800 cc/min
G3000HR, G250HR Meter
38–1900 cc/min
Coriolis Meter
20–3800 cc/min
S3000 Solvent Meter (accessory)
38–1900 cc/min
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
Fluid Outlet Size (static mixer)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
Sound power level
below 85 dBA


北京瑞成智捷科技有限公司 版权所有 2010
北京市西城区马连道南街华睦大厦908室 010-87893407