产品展示
PGM 的大流量使生产力得到提高
- 高流量：
- 室温材料，最高达 600 cc/min
- 高粘度热熔材料，最高达 300 cc/min
- 可实现大流量下平滑、稳定的线状或带状胶型涂布
- 启停精准，可减少材料浪费
- 胶型控制可节省材料成本
- 可安装在自动机机械手装置末端，确保极高的分配精度
- 触摸屏控制装置便于操作、整合
| PGM | |
| Volume Repeatability |
+/- 1%
|
| Minimum Flow Rate |
6 cc/rev model: 30 cc/min, 20 cc/rev model: 40 cc/min
|
| Maximum Flow Rate |
6 cc/rev model: 8 cc, 20 cc/rev model: 10 cc
|
| Maximum Fluid Working Inlet Pressure |
10.3 MPa/103 bar
|
| Maximum Fluid Working Outlet Pressure |
17.2 MPa/172 bar
|
| Air Supply Pressure Range |
60–100 psi (filtration required)
|
| Fluid Filtration Required |
up to 200 mesh, depending on viscosity
|
| Viscosity Range of Fluids |
1,000 — 1,000,000 Poise
|
| Wetted Parts |
Stainless Steel, Tool Steel, Chrome, Carbide, Acetal Plastic, PTFE, Chemical Resistant O-Rings
|
| Power Requirements |
Full Load: 18.5A, Fuse Rating: 21A
|
| Power Supply Voltage Range |
240VAC, 50–60 Hz, single phase
|
| Sound Pressure Level at Maximum Flow Rate |
6 cc/rev model: 58 dB(A), 20 cc/rev model: 72 dB(A)
|
| Sound Power Level at Maximum Flow Rate |
6 cc/rev model: 68 dB(A), 20 cc/rev model: 79 dB(A)
|
| Operating Humidity Range |
10 – 90% non-condensing
|
| Overall Dimensions | |
| 6 cc/rev Model |
50.17 H x 23.83 W x 16.76 D mm
|
| 20 cc/rev Model |
55.25 H x 24.13 W x 22.6 D mm
|
| Controls |
76.2 H x 60.96 W x 30.48 D mm
|
| Weight | |
| 6 cc/revModel |
13.61 kg
|
| 20 cc/rev Model |
27.22 kg
|
| Controls |
45.36 kg
|
| Operating Temperature Range | |
| Control |
4 to 40 °C
|
| Heated Pump |
4 to 204 °C
|
| Ambient Pump |
4 to 49 °C
|
