Endura-Flo 4D150高压隔膜泵|北京瑞成智捷科技有限公司|北京瑞成智捷|美国GRACO|喷涂设备|打胶设备|喷漆设备

The Endura-Flo 4D150 ensures long-lasting durability and can withstand runaway conditions better than other diaphragm pumps. This easy-to-install pump offers low pulsation output and smooth changeover for quick color changes, saving you time and money. Plus it has the highest pressure ratio in the industry at 4:1.

功能：

150 cc per cycle
Redesigned diaphragm lasts longer and can hold up to extreme operating conditions better
Easy access to critical components provides fast online maintenance
Superior durability for abrasive materials
Innovative design ensures easy access to critical components for fast, online repair
Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems
DataTrak option prevents runaway and tracks material usage
Pumps are easily configurable for custom installations

规格：

以美国常用单位查看值.

Endura-Flo 4D150 Diaphragm Pump

Maximum air input pressure
7 bar, 0.7 MPa

Maximum fluid working pressure
28 bar, 2.8 MPa

Maximum static fluid pressure
30 bar, 3.0 MPa

Ratio
4:1

Maximum recommended continuous cycle rate
20 cycles per minute

Volume per cycle (double stroke)
150 cc per cycle

Ambient and operating temperature range. Use dry compressed air when operating at low temperatures.
0 to 50°C

Dry suction lift
7.0 m

Wet suction lift
8.8 m

Air inlet size
1/4 npt

Fluid inlet size
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp

Fluid outlet size
1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp

Weight (approximate)
14 kg

Wetted parts
stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)

Average Sound Pressure Levels in dBA at 20 cpm [measured at 1 meter (3.28 ft) horizontal, 1.5 meter (4.9 ft) above the equipment]

At 70 psi (0.5 MPa, 5.0 bar)
62.3 dBA

At 100 psi (0.7 MPa, 7.0 bar)
62.9 dBA

Sound Power measured per ISO 9614–2.

At 70 psi (0.5 MPa, 5.0 bar)
70.8 dBA

At 100 psi (0.7 MPa, 7.0 bar)
71.6 dBA

Endura-Flo 4D150 Diaphragm Pump
Maximum air input pressure	7 bar, 0.7 MPa
Maximum fluid working pressure	28 bar, 2.8 MPa
Maximum static fluid pressure	30 bar, 3.0 MPa
Ratio	4:1
Maximum recommended continuous cycle rate	20 cycles per minute
Volume per cycle (double stroke)	150 cc per cycle
Ambient and operating temperature range. Use dry compressed air when operating at low temperatures.	0 to 50°C
Dry suction lift	7.0 m
Wet suction lift	8.8 m
Air inlet size	1/4 npt
Fluid inlet size	1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp
Fluid outlet size	1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp
Weight (approximate)	14 kg
Wetted parts	stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)
Average Sound Pressure Levels in dBA at 20 cpm [measured at 1 meter (3.28 ft) horizontal, 1.5 meter (4.9 ft) above the equipment]
At 70 psi (0.5 MPa, 5.0 bar)	62.3 dBA
At 100 psi (0.7 MPa, 7.0 bar)	62.9 dBA
Sound Power measured per ISO 9614–2.
At 70 psi (0.5 MPa, 5.0 bar)	70.8 dBA
At 100 psi (0.7 MPa, 7.0 bar)	71.6 dBA