产品展示比例控制精准，完全可配置
固瑞克 XM 双组份喷涂机可以处理最棘手的防腐涂料，比例控制精准，可下载历史作业数据，适合多种双组份防腐涂料。
固瑞克高级计量技术是比例控制的核心。A料始终稳定输送，B料以高压力注入A料。高级传感技术允许泵补偿压力波动，保证比例精准，提高产能，减少浪费。
固瑞克 XM 适用于船舶、桥梁、铁路和风能行业，针对特殊喷涂作业也能完美配置。选择您需要的附件，就可准确配置系统。
| XM Plural-Component Sprayers | |
| Mixed Ratio Range |
1:1-10:1 (in 0.1 increments)
|
| Ratio Tolerance Range (before alarm) |
+/- 5%
|
| Minimum Flow Rate |
0.95 l/min
|
| Maximum Flow Rate |
11.4 l/min
|
| Fluid Viscosity Range |
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
|
| Fluid Filtration |
238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
|
| Air Inlet |
3/4 npt(f)
|
| Fluid inlets without feed kits |
1 1/4 npt(m)
|
| 50:1 Maximum Fluid Working Pressure of mixed material |
35.8 MPa/358 bar
|
| 70:1 Maximum Fluid Working Pressure of mixed material |
43.5 MPa/435 bar
|
| Maximum Fluid Temperature |
71° C
|
| Air Supply Pressure Range |
0.35-1.0 MPa/3.5-10.3 bar
|
| 50:1 Maximum pump air set pressure |
0.70 MPa/7.0 bar
|
| 70:1 Maximum pump air set pressure |
0.62 MPa/6.2 bar
|
| Maximum pump inlet fluid feed pressure |
1.7 MPa/17 bar
|
| Maximum Air Consumption |
1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min
|
| Air Filtration |
40 micron main filter, 5 micron control air filter
|
| Ambient Operating Temperature Range |
0 to 54° C
|
| Ambient Storage Temperature Range |
-1 to 71° C
|
| Environmental Conditions Rating |
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2)
|
| Sound Pressure |
86 dBA at 0.7 MPa, 7 bar
|
| Sound Power |
98 dBA at 0.7 MPa, 7 bar
|
| Weight |
Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight)
|
| Wetted parts | |
| Suction Tubes |
Aluminum
|
| Flush Pump |
Carbide, PTFE, stainless steel, UHMWPE
|
| Hoses |
Nylon
|
| Pumps (A and B) |
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
|
| Metering Valves |
Carbon Steel, nickel plating, carbide, polyethylene, leather
|
| Manifold |
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
|
| Mixer |
Stainless steel housing with acetal elements
|
