Reactor E-10
Maximum Fluid Working Pressure	140 bar, 14 MPa
Maximum Fluid Temperature	71°C
Maximum Ambient Temperature	43°C
Maximum Output at 340 cycles/min	5.4 kg/min
Output per Cycle (A and B)	0.0133 liter
Overpressure Relief	Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Weight (approximately, depending on model)	72 kg
Wetted Parts	Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Electrical Requirements
Model AP9570, CS9570:	120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
Model AP9571, CS9571:	240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
Model AP9572, CS9572:	240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
Model 249806:	120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
Model 249808:	240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
Generator Size (for Reactor E-10 only)
Heated:	5000 W minimum
Nonheated:	2500 W minimum
Heater Power
120V models:	850 W each; 1700 W total
240V models:	1000 W each; 2000 W total
Sounds Pressure
Fast Circulation Mode:	78.7 dB(A)
At 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm):	84.5 dB(A)
Sound Power, measured per ISO 9416–2
Fast Circulation Mode:	88.6 dB(A)
At 2000 psi (14 MPa, 140 bar, 0.72 gpm (2.7 lpm):	94.4 dB(A)
Tank Capacity (nominal)	26.5 liters
Fluid Outlets
Component A (ISO):	-5 JIC male
Component B (RES):	-6 JIC male
Fluid Circulation Ports
Component A (ISO):	-5 JIC male
Component B (RES):	-6 JIC male
Air Inlet	1/4 in quick-disconnect industrial type pin fitting
Air Outlet	1/4 npsm(m)
Gun Compressed Air Requirements
Fusion Gun (purge air and operating air):	0.112 m³/min
2K Ultra-Lite Gun with disposable mixer kit, with air spray valve fully open:	0.392 m³/min
2K Ultra-Lite Gun with joint fill kit:	0.056 m³/min
Hose Markings
A Side	Red
B Side	Blue