- 最大流量达 100 加仑/分钟（400 升/分钟）
- 最大流体压力为 1200 psi（83 bar，8.3 MPa）
- 无需增压泵
- 多数物料的卸料时间在五分钟之内
- 采用气动或电子控制装置
- 直接从300加仑（1135升）的容器排出高达1,000,000厘泊的高粘度物料，无需稀释
- 适合泵送的物料包括花生酱、焦糖、花生酱、玉米浆、糖衣、霜状白糖、果酱和果冻、牙膏和化妆品
产品展示在您的工厂中使用 SaniForce 吨箱卸料系统 (BES) 直接从 300 加仑（1135.6 升）袋装容器中高效卸料，无需手动舀取或倾倒料箱，从而节省时间和资金。
彻底的箱式卸料可节省水蒸汽成本，提供更好的流程控制，无需使用成本高昂的增压泵。
充气式膨胀压力密封：
| SaniForce Bin Evacuation Systems, BES3xx and BES4xx | |
| Maximum Working Fluid Pressure |
8.4 bar, 0.84 MPa
|
| Compressed air requirement |
5.5–8.4 bar, 0.55–0.84 MPa
|
| Fluid displacement (each pump) |
3.9 l/cycle
|
| Flow rate @ 60 cpm |
454 lpm
|
| Pressure ratio |
1:1
|
| Air consumption (each pump) |
0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
|
| Pump outlet |
3 in tri-clamp
|
| Sound data |
See your pump manual.
|
| Wetted parts |
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
|
| Pneumatic Control Panel | |
| Maximum input air pressure |
8.4 bar, 0.84 MPa
|
| Maximum up/down ram pressure |
5.2 bar, 0.5 MPa
|
| Air inlet — air controls |
3/4 in npt(f)
|
| Air inlet — pump |
1/2 in npt(f)
|
| Electronic Control Panel | |
| Maximum input air pressure |
8.4 bar, 0.84 MPa
|
| Maximum up/down ram pressure |
7 bar, 0.7 MPa
|
| External power supply |
110 VA, 60 Hz, 15 amp maximum circuit breaker required
|
| SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx | |
| Compressed air requirement |
5.5–7 bar, 0.55–0.7 MPa
|
| Pump outlet |
2 in tri-clamp
|
| Sound data |
See your pump manual.
|
| Wetted parts |
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
|
| Maximum Working Fluid Pressure | |
| BESAxx and BESBxx |
28.3 bar, 2.8 MPa
|
| BESExx and BESFxx |
100.4 bar, 10.1 MPa
|
| Fluid displacement (each pump) | |
| BESAxx and BESBxx |
0.87 l/cycle
|
| BESExx and BESFxx |
0.53 l/cycle
|
| Flow rate @ 60 cpm | |
| BESAxx |
104.5 lpm
|
| BESBxx |
204.4 lpm
|
| BESExx |
64.3 lpm
|
| BESFxx |
128.7 lpm
|
| Pressure ratio | |
| BESAxx and BESBxx |
4.3:1
|
| BESExx and BESFxx |
10:1
|
| Air consumption (each pump) | |
| BESAxx and BESBxx |
0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
|
| BESExx and BESFxx |
0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
|
| Pneumatic Control Panel | |
| Maximum input air pressure |
7 bar, 0.7 MPa
|
| Maximum up/down ram pressure |
5.2 bar, 0.5 MPa
|
| Air inlet — air controls |
3/4 in npt(f)
|
| Air inlet — pump |
1 in npt(f)
|
| Electronic Control Panel | |
| Maximum input air pressure |
7 bar, 0.7 MPa
|
| Maximum up/down ram pressure |
7 bar, 0.7 MPa
|
| External power supply |
110 VA, 60 Hz, 15 amp maximum circuit breaker required
|
