Duro-Flo和Xtreme活塞泵

Endura-Flo 4D150

Merkur波纹管柱塞泵

Monark 2-Ball Pump

Presideng 2-Ball Pump

Trtion 1:1 系列

IRB5510机器人系统

喷枪

空气管及涂料管

Blasting Equipment喷砂机

DEF泵

Hot Melt Equipment热熔泵

计量系统

卫生级压罐泵

压力清洗机

喷涂泡沫绝热设备

多组份保护涂层喷涂机

中央集尘系统

移动式集尘器

特种工业集尘器

尼德曼中央集尘打磨控制柜系统

SaniForce 3150 吨箱卸料系统 (BES) 可直接从 300 加仑（1135.6 升）的袋装容器中高效卸料，无需稀释。该系统标配充气式膨胀密封圈，可快速替换空容器。气动控制用于不需要计量或批量控制的应用场合，而电动控制则可用于需要这些功能的场合。

可膨胀压力密封：

• 充气式刮片膨胀形成严实的密封，防止污染物进入容器
• 使用膨胀刮片密封可提高效率及更快替换空容器
• 采用独有的浮动压盘，省去在压盘下精确放置料桶的麻烦

 

 

 

SaniForce Bin Evacuation Systems, BES3xx and BES4xx
Maximum Working Fluid Pressure	8.4 bar, 0.84 MPa
Compressed air requirement	5.5–8.4 bar, 0.55–0.84 MPa
Fluid displacement (each pump)	3.9 l/cycle
Flow rate @ 60 cpm	454 lpm
Pressure ratio	1:1
Air consumption (each pump)	0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pump outlet	3 in tri-clamp
Sound data	See your pump manual.
Wetted parts	300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Pneumatic Control Panel
Maximum input air pressure	8.4 bar, 0.84 MPa
Maximum up/down ram pressure	5.2 bar, 0.5 MPa
Air inlet — air controls	3/4 in npt(f)
Air inlet — pump	1/2 in npt(f)
Electronic Control Panel
Maximum input air pressure	8.4 bar, 0.84 MPa
Maximum up/down ram pressure	7 bar, 0.7 MPa
External power supply	110 VA, 60 Hz, 15 amp maximum circuit breaker required

SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx
Compressed air requirement	5.5–7 bar, 0.55–0.7 MPa
Pump outlet	2 in tri-clamp
Sound data	See your pump manual.
Wetted parts	300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Maximum Working Fluid Pressure
BESAxx and BESBxx	28.3 bar, 2.8 MPa
BESExx and BESFxx	100.4 bar, 10.1 MPa
Fluid displacement (each pump)
BESAxx and BESBxx	0.87 l/cycle
BESExx and BESFxx	0.53 l/cycle
Flow rate @ 60 cpm
BESAxx	104.5 lpm
BESBxx	204.4 lpm
BESExx	64.3 lpm
BESFxx	128.7 lpm
Pressure ratio
BESAxx and BESBxx	4.3:1
BESExx and BESFxx	10:1
Air consumption (each pump)
BESAxx and BESBxx	0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
BESExx and BESFxx	0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pneumatic Control Panel
Maximum input air pressure	7 bar, 0.7 MPa
Maximum up/down ram pressure	5.2 bar, 0.5 MPa
Air inlet — air controls	3/4 in npt(f)
Air inlet — pump	1 in npt(f)
Electronic Control Panel
Maximum input air pressure	7 bar, 0.7 MPa
Maximum up/down ram pressure	7 bar, 0.7 MPa
External power supply