- 卫生法兰卡箍连接可快速拆卸
- 流体部件经过卫生喷丸处理
- 流体接触区域均符合 FDA 标准且遵照美国联邦法典第 21 章
- 提供内置式或外露式控制装置
- 可直接从55加仑料桶排出凝滞不能流动的物料
- 适合泵送的物料包括番茄酱、花生酱、糖衣、药膏和沐浴露
产品展示SaniForce 2150 卫生级压盘泵标配充气式膨胀压力密封，方便快速更换空容器，排料率达99%，无需对物料进行稀释。
压力密封：
Sanitary Drum Unloaders
Maximum Working Fluid Pressure
5:1 Ratio Piston Pumps
28.3 bar, 2.8 MPa
6:1 Ratio Piston Pumps
44.8 bar, 4.5 MPa
12:1 Ratio Piston Pumps
100.0 bar, 10 MPa
Diaphragm Pumps
8.2 bar, 0.8 MPa
Maximum Air Inlet Pressures
Piston Pump Ram Packages
6.9 bar, 0.7 MPa
Diaphragm Pump Ram Packages
8.0 bar, 0.8 MPa
Ram
6.9 bar, 0.7 MPa
6:1 and 12:1 Ratio Piston Pumps
6.9 bar, 0.7 MPa
5:1 Ratio Piston Pumps
5.5 bar, 0.6 MPa
Diaphragm Pumps
8 bar, 0.8 MPa
Air Inlet Size
Enclosed Controls
1/2 npt(f)
Exposed Controls
3/4 npt(f)
Maximum Ram Package Operating Temperature
5:1 Ratio Piston Pump Ram Packages
60°C
All Other Ram Packages
66°C
Maximum/Minimum Drum Sizes
Maximum Drum ID
61 cm
Minimum Drum ID — straight sided
49 cm
Minimum Drum ID — tapered`
48 cm
Maximum Drum Height
104 cm
Wetted Parts
Inflatable Seal
Neoprene
Ram (plate, fittings, gaskets)
300–Series stainless steel, Buna-N, and polypropylene
5:1 Ratio Piston Pumps (see pump manual)
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
6:1 Ratio Piston Pumps (see pump manual)
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
12:1 Ratio Piston Pumps (see pump manual)
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Diaphragm Pumps (see pump manual)
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
Noise Data
All Models
See your pump manual.
SaniForce 2150 Diaphragm Pumps
Maximum fluid working pressure
8 bar, 0.8 MPa
Air pressure operating range
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
5 m³/minute
Air consumption at 70 psi, 50 gpm
2.0 m³/minute
Maximum free-flow delivery
568 lpm
Maximum pump speed
165 cpm
Gallons/liters per cycle*
3.7 l
Maximum suction lift
8.8 m wet, 4.9 m dry
Maximum size pumpable solids
6.3 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
95 dB(A)
Sound power level
102 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
84 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
104°C
Santoprene®
82°C
EPDM
135°C
Polychloroprene
93°C
Stainless Steel
121°C
Inlet/Outlet Sizes
Air inlet size
0.5 in npt(f)
Fluid inlet size
2.5 in sanitary flange
Fluid outlet size
2.5 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel
Wetted materials depending on model
EPDM, Polychloroprene, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
Weight
FD2 Models
66.7 kg
FA1 Models
64 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1.*** The pump user must verify that the construction materials meet their specific application requirements.
