- 60 cpm条件 时的最大流量为8.5 加仑/分钟（32 升/分钟）
- 1,200 psi（83 bar，8.3 MPa）的出口压力
- 同一规格的压盘和密封圈适用于直桶和锥形桶两种类型
- 卫生法兰卡箍可快速拆卸
- 填料柱塞配置可直接从55加仑料桶中排出粘度高达1,000,000厘泊的物料，无需稀释
- 适合泵送的物料包括果酱、花生酱、焦糖、玉米浆、奶糖夹心料、番茄酱和化妆品
产品展示SaniForce 12:1 卫生级压盘泵可方便调节所需流量，在具有频繁清洗卫生要求的场合，可快速拆卸泵体进行清洗。配置填料柱塞设计的下缸体可处理粘度高达 1,000,000 厘泊的物料。
压力密封：
Sanitary Drum Unloaders
Maximum Working Fluid Pressure
5:1 Ratio Piston Pumps
28.3 bar, 2.8 MPa
6:1 Ratio Piston Pumps
44.8 bar, 4.5 MPa
12:1 Ratio Piston Pumps
100.0 bar, 10 MPa
Diaphragm Pumps
8.2 bar, 0.8 MPa
Maximum Air Inlet Pressures
Piston Pump Ram Packages
6.9 bar, 0.7 MPa
Diaphragm Pump Ram Packages
8.0 bar, 0.8 MPa
Ram
6.9 bar, 0.7 MPa
6:1 and 12:1 Ratio Piston Pumps
6.9 bar, 0.7 MPa
5:1 Ratio Piston Pumps
5.5 bar, 0.6 MPa
Diaphragm Pumps
8 bar, 0.8 MPa
Air Inlet Size
Enclosed Controls
1/2 npt(f)
Exposed Controls
3/4 npt(f)
Maximum Ram Package Operating Temperature
5:1 Ratio Piston Pump Ram Packages
60°C
All Other Ram Packages
66°C
Maximum/Minimum Drum Sizes
Maximum Drum ID
61 cm
Minimum Drum ID — straight sided
49 cm
Minimum Drum ID — tapered`
48 cm
Maximum Drum Height
104 cm
Wetted Parts
Inflatable Seal
Neoprene
Ram (plate, fittings, gaskets)
300–Series stainless steel, Buna-N, and polypropylene
5:1 Ratio Piston Pumps (see pump manual)
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
6:1 Ratio Piston Pumps (see pump manual)
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
12:1 Ratio Piston Pumps (see pump manual)
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Diaphragm Pumps (see pump manual)
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
Noise Data
All Models
See your pump manual.
